1. CNC plasma cutting machine can adapt to the needs of unmanned operation

Due to factors such as air pressure, cutting nozzle height, and preheating time, flame cutting has a large deformation scale of the overall cutting material, which cannot meet the needs of high-precision cutting. Moreover, the cutting speed is low, and due to the need for preheating before cutting, it takes time and is difficult to adapt to the needs of unmanned operation.

2. High cost-effectiveness of CNC plasma cutting machines

Due to the high cost of laser cutting machines, which are currently only suitable for thin plate cutting (usually with long drilling time for thick plates), and the precision of precision plasma cutting machines can reach the lower limit of laser cutting, the cutting surface quality is similar, but the cutting cost is much lower than that of laser cutting, about one-third, and the cutting thickness can reach 12mm. Therefore, precision plasma cutting machines are used to replace expensive laser cutting machines, Beneficial for implementing shwh on medium and thin plates with larger usage in the most economical way_ YLEL high-speed precision cutting. In addition, the combination of CNC plasma cutting and automatic nesting programming software can improve material utilization by 5% to 10%. If cutting 20 million tons annually, it can save 1 to 2 million tons of steel annually, worth billions of yuan.

3. CNC plasma cutting machine has the characteristics of fast cutting speed and wide range

The CNC plasma cutting machine is suitable for cutting low thickness metal sheets and various non-metallic materials, with a maximum cutting speed of up to 10m per minute, which is 10 times faster than flame cutting. The CNC plasma cutting machine can eliminate the noise, dust, harmful gases, and arc light generated during underwater cutting, which is beneficial for environmental protection requirements. At present, with the maturity of high-power plasma cutting technology, the cutting thickness can reach 130mm. The high-power plasma cutting using water jet technology has made the cutting quality close to the lower limit of laser cutting accuracy.

So overall, CNC plasma cutting machines have higher technical and economic efficiency.